PNG  IHDR;IDATxܻn0K )(pA 7LeG{ §㻢|ذaÆ 6lذaÆ 6lذaÆ 6lom$^yذag5bÆ 6lذaÆ 6lذa{ 6lذaÆ `}HFkm,mӪôô! x|'ܢ˟;E:9&ᶒ}{v]n&6 h_tڠ͵-ҫZ;Z$.Pkž)!o>}leQfJTu іچ\X=8Rن4`Vwl>nG^is"ms$ui?wbs[m6K4O.4%/bC%t Mז -lG6mrz2s%9s@-k9=)kB5\+͂Zsٲ Rn~GRC wIcIn7jJhۛNCS|j08yiHKֶۛkɈ+;SzL/F*\Ԕ#"5m2[S=gnaPeғL lذaÆ 6l^ḵaÆ 6lذaÆ 6lذa; _ذaÆ 6lذaÆ 6lذaÆ RIENDB` GENERAL ======= This directory contains the firmware data files for usx2yloader utility in alsa-tools package. Install this with the same prefix option as you used for alsa-tools. BUILDING FIRMWARE FROM SOURCE ============================= Building the firmware from source is possible, if you use the configure option --enable-buildfw. Also, it requires the 8031/8051 cross-assembler as31. As31 version 2.3.0 is fine for this job, but every version since 2.2 should do it. As31 is available from: http://wiki.erazor-zone.de/doku.php?id=wiki:projects:linux:as31 At the moment it's only possible to build tascam_loader.ihx from source. COPYRIGHT ========= tascam_loader.ihx, tascam_loader.asm and an2131.asm: Available under GPL without restrictions. other firmware files: Copyright (c) 2003 Tascam / TEAC Corporation. Distributable under GPL.